Carcassonne big box dividers design files (for all expansions in English, Dutch & German)
THIS IS A DIGITAL LISTING ONLY, DOES NOT INCLUDE AN ACTUAL BOX BUT ONLY THE DESIGN FILES FOR OWN MANUFACTURING PURPOSES.
(DUTCH BELOW)
New interior dividers for the Carcassonne big box 7 (424mm x 309mm interior size, edition 2021-). This new divider enables you to not only store all components of the 11 expansions (expansion 1/2 and 9 mini-expansions) which come with the bix box, but also expansion 3-10 (excluding the catapult (discontinued)) and Carcassonne: The Mist.
This interior is designed for 3mm plywood and requires little gluing (only for the 6 player boxes), the rest of the box is pressed together by the exterior cardboard. The box has text and symbols for all game pieces (Dutch, English & German version are included in the listing)
The divider is designed for a laser bed of at least 60cm x 30cm. However, the largest part is 309mmx215mm (longest is424mmx50mm) so with reshufling of the elements a smaller laser could also be used.
This listing includes a 3D model for fusion360 (.stp file also included) and the adobe illustrator file (.dxf/.pdf/.svg also included) which includes RGB(255,0,0) lines for cutting with a laser cutting and RGB(0,0,0) for strong laser engraving and RGB(0,0,255) for a 2nd, weaker, engraving.
For any dimensions/questions feel free to contact me.
New interior for the Carcassonne big box 7 (424mm x 309mm interior, edition 2021-). These dividers are a replacement for the cardboard pieces that are in the big box. These new distributors make it possible to add extensions 3-10 (minus the catapult (no longer available)) and Carcassonne: The Mist, in addition to the 11 expansions of the big box (expansion 1/2 and 9 mini expansions).
The interior is intended for 3mm plywood and requires little glue (only for the 6 play boxes), the rest of the box is attached with pressure from the big box itself. The dividers have text and symbols for all game pieces and cards.
This listing contains the 3D model for fusion360 (.stp file also attached) and the adobe illustrator file (.dxf/.pdf/.svg also attached) where the engravings and cutting lines are defined: RGB(255,0,0) for lines that need to be cut with a laser cutter, RGB(0,0,0) for deeply engraved pieces and (0,0,255) for less deep engravings.
For questions or specific dimensions, please contact us.